gdpll

A command of the separate bcma command line; see Commands for other chip families.

Generic DPLL commands.

gdpll load <filename> [UC=<core_num>] [StartUC=yes|no] [PTSync=yes|no]
status [<core_num>]

Built-in help

The load command is used to download and execute firmware for a
M7 processor on a switch device.
Options supported by the load command:
    <filename>          - The firmware file name to download. 'NONE'
                          to skip firmware download.
    UC=<core_num>       - Processor core ID (0, 1, etc.)                          Select uC automatically if undefined
    StartUC=<YES/no>    - Start the microcontroller after downloading
                          the firmware.
    PTSync=<YES/no>     - Sync Phy Tiles by creating GDPLL channels
                          after downloading the firmware.

The status command displays the firmware version as well as various
debug information
Options supported by the status command:
    <core_num>          - Processor core ID (0, 1, etc.)


.

Built-in examples

load BCMxxx_gdpll.srec
status