imctrl

A command of the separate bcma command line; see Commands for other chip families.

Interface module management user interface.

imctrl <id> [lport=true] <sub-cmd>

Built-in help

This command is used to manage interface module on the Broadcom SVKs.
By default, <id> represents a Port Macro ID. You can instead specify a
logical port number by adding the option lport=true
The following sub-commands are supported:
LowPowerMode <value>
    Power mode set: 1 - low power mode, 0 - high power mode.
Reset <value>
    Reset control: 1 - reset, 0 - de-assert reset.
Status
    Show module's status (Present/Reset/LowPowerMode/interrupt)

Built-in examples

1 status
1 reset 1
1 lowpowermode 0