SHOW

Note

This command belongs to the shell mode for newer (logical-table) switch chips and is not available on Trident 3.

Show information on a subsystem

Built-in help

Usages:
  show Counters [Changed] [Same] [Z] [NZ] [ErDisc] [ALL] [<pbmp>] [Rate]
    Display all counters, or only specified regs and/or ports
      Changed - include counters that changed
      Same    - include counters that did not change
      Z       - include counters that are zero
      Nz      - include counters that are not zero
      All     - same as: Changed Same Z Nz
      ErDisc  - Only show those counters marked with Error/Discard
    NOTES: If neither Changed or Same is specified, Change is used.
           Use All to display counters regardless of value.
      Rate    - show counter rate
  show features [all] - Show enabled (or all) features for this unit
  show CONFig [lt] [raw] - Show configurations in yaml format.
      If 'lt' is specified, show configurations specific to LT.
      If 'raw' is specified together with 'lt', show raw configurations.
  show Threads - Show threads information.
  show ICid - Show ICID (IC identification number).
  show CannedConfig - Show device canned configuration.
  show DevInfo - Show device information.