`IPMC`

Note

This command belongs to the shell mode for newer (logical-table) switch chips and is not available on Trident 3.

Manage IPMC (IP Multicast) addresses

Built-in help

Usages:
      ipmc init
           - Init ipmc function.
      ipmc detach
           - Detach ipmc function.
      ipmc table add Src_IP=<ipaddr> Src_IPMaskLen=<ipaddr> Mc_IP=<grpaddr>
             Mc_IPMaskLen=<grpaddr> VlanID=<vid>
             Group=<val> [GroupL2=<val>] [src_Port=<port>] [COS=<cosl>]
             [TS=<tsl>] [Valid=<bool>] [NoCHECK=<bool>] [IngIntf=<val>]
             [Replace=<bool>] [VRF=<vrf>] [LookupClass=<val>] [RPid=<val>] [Hit=<bool>]
           - Add an entry into ipmc table.
      ipmc table del Src_IP=<ipaddr> Src_IPMaskLen=<ipaddr> Mc_IP=<macaddr>
             Mc_IPMaskLen=<grpaddr> VlanID=<vid> [VRF=<vrf>] [IngIntf=<val>]
           - Destroy an entry in ipmc table.
      ipmc table clear
           - Delete all ipmc table.
      ipmc table show [L2]
           - Display all ipmc table or L2 ipmc only.
      ipmc ip6table add Src_IP=<ipaddr> Src_IPMaskLen=<ipaddr> Mc_IP=<grpaddr>
             Mc_IPMaskLen=<grpaddr> VlanID=<vid>
             Group=<val> [src_Port=<port>] [COS=<cosl>]
             [NoCHECK=<bool>] [TS=<tsl>] [IngIntf=<val>]
             [Valid=<bool>] [LookupClass=<val>] [VRF=<vrf>] [Hit=<bool>]
            - Add an entry into the IPv6 ipmc table.
      ipmc ip6table del Src_IP=<ipaddr> Src_IPMaskLen=<ipaddr> Mc_IP=<macaddr>
             VlanID=<vid> [VRF=<vrf>]
           - Destroy an entry in the IPv6 ipmc table
      ipmc ip6table clear
           - Delete all IPv6 ipmc table.
      ipmc ip6table show [L2]
           - Display all IPv6 ipmc table or L2 ipmc only.
      ipmc rp add RPid=<val> IngIntf=<val>
           - Add an Ingress Intf to a RP ID.
      ipmc rp del RPid=<val> IngIntf=<val>
           - Remove an Ingress Intf from a RP ID.
      ipmc rp clear RPid=<val>
           - Remove all the Ingress Intf list from a RP ID.
      ipmc rp show
           - Display all RP IDs and their L3_IIF list information.
      ipmc rp set RPid=<val> IngIntfCount=<val> IngIntf0=<val> IngIntf1=<val>...
           - Set an Intf list to a RP ID.
      ipmc rp get RPid=<val> IngIntfMax=<val>
           - Get an Intf list in the given size from a RP ID.

IPMC

`IPMC`