TestList

List loaded tests and status

TestList

Shortest form: tl.

List the built-in diagnostic tests with their state and run statistics: whether a test is active (A) or selected (S), how often it has run, passed and failed. A test ID is a test number, a test name or *. A name may be shortened to any unique prefix, and the first match wins.

• no argument, or *: the tests supported on this chip;

• all: every test, including those not supported on this chip;

• fail: only the numbers of the tests that have failed, or All tests passed;

• test IDs: just those tests.

The build includes 76 tests, among them 1 Register reset defaults, 3 Register read/write, 5 BIST, 18 MAC Loopback, 19 PHY Loopback, 39 New Snake Test, 50 Memory Fill/Verify, 54 TD3/MV2 Special Mem Test and 72 Traffic Test. Run them with testrun.

Read-only. The table form reports failure when no listed test has run yet or when any has failed, so scripts can check the result. Through the SAI front-end that failure shows as Failed to execute the diagnostic command. Error: Operation failed. after the table, which is what you see on a switch where no test has ever run.

Hardware-validated

drivshell> testlist
-----+----+--- TEST STATUS REPORT ----+-----+-----+-----+-----+-----------
U/A/S|Test|            Test           |Loop | Run |Pass |Fail |  Arguments
     | #  |            Name           |Count|Count|Count|Count|
-----+----+---------------------------+-----+-----+-----+-----+-----------
   S |   1| Register reset defaults   |    1|    0|    0|    0| (none)
   S |   2| PCI Compliance            |  100|    0|    0|    0| (none)
   S |   3| Register read/write       |    1|    0|    0|    0| (none)
   S |   4| PCI S-Channel Buf         |  100|    0|    0|    0| (none)
   S |   5| BIST                      |    1|    0|    0|    0| ALL
     |  17| CPU Loopback              |    1|    0|    0|    0| (none)
     |  18| MAC Loopback              |    1|    0|    0|    0| (none)
     |  19| PHY Loopback              |    1|    0|    0|    0| (none)
     |  20| EXT Loopback              |    1|    0|    0|    0| (none)
     |  21| CPU Benchmarks            |    1|    0|    0|    0| (none)
     |  22| CPU S/G, Reload           |    1|    0|    0|    0| (none)
     |  23| CPU S/G, Simple           |    1|    0|    0|    0| (none)
     |  24| CPU S/G, Random           |    1|    0|    0|    0| (none)
     |  30| Counter widths            |    1|    0|    0|    0| (none)
     |  31| Counter read/write        |    1|    0|    0|    0| (none)
   S |  32| XGS L2 Ins/Lookup/Del     |    1|    0|    0|    0| (none)
   S |  33| XGS L2 Overflow Ins       |    1|    0|    0|    0| (none)
   S |  34| XGS L2 Hashing            |    1|    0|    0|    0| (none)
   S |  35| XGS L2 Delete by Port     |    1|    0|    0|    0| (none)
   S |  36| XGS L2 Delete by VLAN     |    1|    0|    0|    0| (none)
     |  39| New Snake Test            |    1|    0|    0|    0| (none)
     |  40| BCM Packet Send           |    1|    0|    0|    0| (none)
     |  41| BCM Packet Receive        |    1|    0|    0|    0| (none)
     |  42| PKTIO Packet Send/Receive Multi-channel|    1|    0|    0|    0| (none)
     |  48| MAC Loopback - Mark 2     |    1|    0|    0|    0| (none)
     |  49| PHY Loopback - Mark 2     |    1|    0|    0|    0| (none)
...

testlist fail

Print the numbers of all tests that have failed so far, or All tests passed.

Hardware-validated

drivshell> testlist fail
All tests passed

Built-in help

Parameters: [Test ID] ...
    Display the tests specified by [Test ID] in table format,
    A=active, S=selected, # Runs = number times test dispatched,
    # Pass = number times test completed successfully,
    # Fail = number times test completed with a failure
    "Test ID" is a test #, test name, or "*"